Schneider VPL06N Regulator Capacitor 6 step Varplus Logic

Rp7.436.908

Main Specification

• PowerLogic PFC Controller
• VPL6 device short name
• Power factor controller product type
• 6 step output contacts
• Rated supply voltage:
  • 90…550 V AC
  • <= 999 kV AC with external VT
• 0…5 A measurement current
• 90…550 V AC 50/60 Hz measurement voltage
• Manual or automatic operating mode
• 4 quadrant operation for generator application
• Communication protocol: Modbus interface: RS485 device connection
• Switch: 1 x dry contact input function
• Front: dark grey RAL 7016 colour code
• Backlit LCD display type
• 56 x 25 mm display size

Complementary

• Function available:
  • Automatic detection
  • Advanced programming (expert)
  • Manual programming
  • Any step sequence
  • Automatic initialisation
• Metering type:
  • Power factor and displacement PF (signed, four quadrant)
  • Total current harmonic distortion THD (I)
  • Power factor average over lifetime
  • Temperature maximum
  • Phase current I1, I2, I3 RMS on load
  • Active power P, P1, P2, P3 on load
  • Reactive power Q, Q1, Q2, Q3 on load
  • Apparent power S, S1, S2, S3 on load
  • Voltage U21, U32, U13, V1, V2, V3 on load
• Type of measurement:
  • Ambient temperature inside the cubicle
  • Tan φ
  • Individual voltage harmonic
  • Cos φ
  • Operating time
  • Power factor
  • Capacitor current overload Irms/I1
• Information displayed:
  • Number of switching cycles per step
  • Remaining step capacity in %
  • Individual step size in kVAr
• Type of alarms:
  • Step power loss (< 75 %) / Action: message and alarm contact + step blocked
  • Step faulty / Action: message and alarm contact + step blocked
  • High current (> 6 A CT) / Action: message and alarm contact
  • Hunting (unstable regulation) / Action: message and alarm contact + step blocked
  • Low current (< 15 mA CT) / Action: message and alarm contact
  • Overcompensation / Action: message and alarm contact
  • Capacitor current overload (Irms/I1) (> 130 % I1) / Action: message and alarm contact + step switched off
  • Overtemperature (50 °C) / Action: message and alarm contact + step switched off
  • Overtemperature (30 °C) / Action: fan switch
  • Overvoltage (+/- 10 %) / Action: message and alarm contact + control stopped
  • Total harmonic distortion (> 7 %) / Action: message and alarm contact + step switched off

Environment

• 5 alarms data recording
• 100000 Hours alarm without maintenance
• 65000 cycles Operational counter alarm without maintenance
• Input type:
  • Insensitive to phase rotation polarity
  • Insensitive to CT polarity
  • Phase to neutral
  • Current input CT…X/5 A and X/1 A
  • Phase to phase
• Output type:
  • Control relay:
    • 0.2 A 110 V DC
    • 1 A 48 V DC
    • 2 A 400 V AC 50/60 Hz
    • 1 A 24 V DC
    • 5 A 250 V AC 50/60 Hz
    • 5 A 120 V AC 50/60 Hz
  • Fan: 5 A 250 V AC 50/60 Hz
  • Fan: 1 A 48 V DC
  • Alarm relay: 5 A 250 V AC 50/60 Hz
  • Alarm relay: 1 A 48 V DC
• 10 A Maximum at the common terminal
• Manual & Automatic Settings operating mode
• Type of setting:
  • Choice of stepping programs: auto, LIFO, linear
  • Delay between 2 successive switch on the same step: 5…1200 s
  • Step configuration programming: auto, off, fixed
  • Target cos phi: 0.7 inductive…0.7 capacitive
  • Target cos phi: dual cos φ
• Measurement accuracy:
  • Voltage +/- 1 %
  • Current +/- 1 %
  • Frequency +/- 1 %
  • Energy (P,Q,S) +/- 2 %
  • Cos φ +/- 2 %
  • Total voltage harmonic distortion THD (U) +/- 2 %
  • Individual voltage harmonic +/- 3 %
  • Temperature +/- 3 °C
• Time delay range:
  • 1…6500 s (on reconnection)
  • 1…6500 s (on response)

Stock Available

Schneider VPL06N Regulator Capacitor 6 step Varplus Logic

Schneider VPL06N Regulator Capacitor 6 step

SKU: VPL06N Categories: Capacitor, Capacitor BLRCH, Uncategorized