Schneider ATV212HU40N4 Inverter 4kW 3P EMC 480V

Rp10.254.224

Main Specification

• ATV212 device’s short name
• Asynchronous motors
• 3 phases
• 4 kW motor power
• 5 hp motor power hp
• 323 – 528 V supply voltage limits
• 50 – 60 Hz supply frequency at 5 – 5 %
• Line current:
  • 6.4 A at 480 V
  • 8.1 A at 380 V
• Variable speed drive product type
• Pumps and fans in HVAC application
• Communication port protocol:
  • Modbus
  • METASYS N2
  • APOGEE FLN
  • LonWorks
  • BACnet
• 380 – 480 V rated supply voltage 15 – 10 %
• Class C2 EMC filter integrated
• IP21 conforming to IP degree of protection
• 6.9 kVA apparent power at 380 V
• Continuous output current:
  • 9.1  A at 380 V
  • 9.1 A at 460 V
• 10 A maximum transient current for 60 s
• 0.5 – 200 Hz speed drive output frequency
• 1 – 10 speed range
• +/- 10 % speed accuracy of nominal slip 0.2 Tn to Tn
• 1 LED (red) local signalling for DC bus energized
• Output voltage <= power supply voltage
• Electrical between power and control isolation
• Type of cable:
  • Without mounting kit: 1 wire(s)IEC cable at 45 °C, copper 90 °C / XLPE/EPR
  • Without mounting kit: 1 wire(s)IEC cable at 45 °C, copper 70 °C / PVC
  • With UL Type 1 kit: 3 wire(s)UL 508 cable at 40 °C, copper 75 °C / PVC
• Electrical connection:
  • VIA, VIB, FM, FLA, FLB, FLC, RY, RC, F, R, RES: terminal 2.5 mm² / AWG 14
  • L1/R, L2/S, L3/T: terminal 6 mm² / AWG 10
• Tightening torque:
  • 1.3 N.m, 11.5 lb.in (L1/R, L2/S, L3/T)
  • 0.6 N.m (VIA, VIB, FM, FLA, FLB, FLC, RY, RC, F, R, RES)

Schneider ATV212HU40N4 Inverter 4kW

• Supply:
  • Internal supply for reference potentiometer (1 to 10 kOhm): 10.5 V DC +/- 5 %, <10 A, protection type: overload and short circuit protection
  • Internal supply: 24 V DC (21…27 V), <200 A, protection type: overload and short-circuit protection
• Sampling duration:
  • 2 ms +/- 0.5 ms:
    • F discrete
    • R discrete
    • RES discrete
  • 3.5 ms +/- 0.5 ms VIA analog
  • 22 ms +/- 0.5 ms VIB analog
• Response time:
  • FM 2 ms, tolerance +/- 0.5 ms for analog output(s)
  • FLA, FLC 7 ms, tolerance +/- 0.5 ms for discrete output(s)
  • FLB, FLC 7 ms, tolerance +/- 0.5 ms for discrete output(s)
  • RY, RC 7 ms, tolerance +/- 0.5 ms for discrete output(s)
• Accuracy +/- :
  • 0.6 % (VIA) for a temperature variation 60 °C
  •  0.6 % (VIB) for a temperature variation 60 °C
  • 1 % (FM) for a temperature variation 60 °C
• Linearity error:
  • VIA: +/- 0.15 % of maximum value for input
  • VIB: +/- 0.15 % of maximum value for input
  • FM: +/- 0.2 % for output
• Analogue output type:
  • FM switch-configurable voltage 0…10 V DC, impedance: 7620 Ohm, resolution 10 bits
  • FM switch-configurable current 0…20 mA, impedance: 970 Ohm, resolution 10 bits
• Configurable relay logic discrete output type:
  • (FLA, FLC) NO – 100000 cycles
  • (FLB, FLC) NC – 100000 cycles
  • (RY, RC) NO – 100000 cycles
• 3 mA at 24 V DC minimum switching current for configurable relay logic
• Maximum switching current:
  • 5 A at 250 V AC on resistive load – cos phi = 1 – L/R = 0 ms (FL, R)
  • 5 A at 30 V DC on resistive load – cos phi = 1 – L/R = 0 ms (FL, R)
  • 2 A at 250 V AC on inductive load – cos phi = 0.4 – L/R = 7 ms (FL, R)
  • 2 A at 30 V DC on inductive load – cos phi = 0.4 – L/R = 7 ms (FL, R)

Complementary

• Discrete input type:
  • F programmable 24 V DC, with level 1 PLC, impedance: 4700 Ohm
  • R programmable 24 V DC, with level 1 PLC, impedance: 4700 Ohm
  • RES programmable 24 V DC, with level 1 PLC, impedance: 4700 Ohm
• Discrete input logic:
  • Positive logic (source) (F, R, RES), <= 5 V (state 0), >= 11 V (state 1)
  • Negative logic (sink) (F, R, RES), >= 16 V (state 0), <= 10 V (state 1)
• Dielectric strength:
  • 3535 V DC between earth and power terminals
  • 5092 V DC between control and power terminals
• Insulation resistance >= 1 mOhm 500 V DC for 1 minute
• Frequency resolution:
  • Display unit: 0.1 Hz
  • Analog input: 0.024/50 Hz
• Communication service:
  • Read device identification (43)
  • Time out setting from 0.1 to 100 s
  • Write single register (06)
  • Write multiple registers (16) 2 words maximum
  • Monitoring inhibitable
  • Read holding registers (03) 2 words maximum
• Communication card for LonWorks
• 176 W power dissipation
• 60 m3/h air flow
• Mid functionality
• HVAC specific application
• Variable speed drive application selection:
  • Compressor for scroll Building – HVAC
  • Fan Building – HVAC
  • Pump Building – HVAC
• Motor power range AC-3:
  • 4 – 6 kW at 380 – 440 V 3 phases
  • 4 – 6 kW at 480 – 500 V 3 phases
• Variable speed drive motor starter type
• 2 discrete output number
• 2 analogue input number
• Analogue input type:
  • VIA switch-configurable voltage: 0…10 V DC 24 V max, impedance: 30000 Ohm, resolution 10 bits
  • VIB configurable voltage: 0…10 V DC 24 V max, impedance: 30000 Ohm, resolution 10 bits
  • VIB configurable PTC probe: 0…6 probes, impedance: 1500 Ohm
  • VIA switch-configurable current: 0…20 mA, impedance: 250 Ohm, resolution 10 bits

Environment

• 1 analogue output number
• 2-wire RS 485 physical interface
• Connector type:
  • 1 open style
  • 1 RJ45
• 9600 bps or 19200 bps transmission rate
• RTU transmission frame
• 1 – 247 number of addresses
• 8 bits, 1 stop, odd even or no configurable parity data format
• No impedance polarization
• Asynchronous motor control profile:
  • Voltage/frequency ratio, automatic IR compensation (U/f + automatic Uo)
  • Voltage/frequency ratio – Energy Saving, quadratic U/f
  • Flux vector control without sensor, standard
  • Voltage/frequency ratio, 2 points
  • Voltage/frequency ratio, 5 points
• +/- 15 % torque accuracy
• 120 % of nominal motor torque +/- 10 % for 60 s
• Acceleration and deceleration ramps:
  • Automatic based on the load
  • Linear adjustable separately from 0.01 to 3200 s
• Motor slip compensation:
  • Not available in voltage/frequency ratio motor control
  • Automatic whatever the load
  • Adjustable
• Switching frequency:
  • 6…16 kHz adjustable
  • 12…16 kHz with derating factor
• 12 kHz nominal switching frequency
• Braking to standstill By DC injection
• 47.5 – 63 Hz network frequency
• 5 kA prospective line Isc
• Protection type:
  • Overheating protection: drive
  • Thermal power stage: drive
  • Short-circuit between motor phases: drive
  • Input phase breaks: drive
  • Overcurrent between output phases and earth: drive
  • Overvoltages on the DC bus: drive
  • Break on the control circuit: drive
  • Against exceeding limit speed: drive
  • Line supply overvoltage and undervoltage: drive
  • Line supply undervoltage: drive
  • Against input phase loss: drive
  • Thermal protection: motor
  • Motor phase break: motor
  • With PTC probes: motor
• IP degree of protection:
  • IP20 on upper part without blanking plate on cover conforming to EN/IEC 61800-5-1
  • IP20 on upper part without blanking plate on cover conforming to EN/IEC 60529
  • IP21 conforming to EN/IEC 61800-5-1
  • IP21 conforming to EN/IEC 60529
  • IP41 on upper part conforming to EN/IEC 61800-5-1
  • IP41 on upper part conforming to EN/IEC 60529

Out of stock

Schneider ATV212HU40N4 Inverter 4kW 3P EMC 480V

Schneider ATV212HU40N4 Inverter 4kW

SKU: ATV212HU40N4 Categories: Inverter, Inverter ATV212