Autonics ATS8SD-4 Star Delta Timer 100-240V AC / 24-240V DC

Rp404.928

Autonics ATS8SD-4 Star Delta Timer 100-240V AC / 24-240V DC

Autonics ATS8SD-4 Star Delta Timer 100-240V AC / 24-240V DC. Timer Analog Ringkas Star-Delta seri ATS8SD4 ideal untuk memulai motor berkapasitas tinggi dengan transisi star-delta. Beragam kisaran pengaturan waktu dan waktu switching star-delta dapat dengan mudah dikonfigurasikan dengan switch penyesuai. Braket DIN standar berukuran L 48 x T 48 mm termasuk untuk instalasi yang mudah.

Datasheet

• Ideal for starting high capacity motors
• Various time setting range and star-delta switching time
• Standard DIN W 48 x H 48 mm bracket included
• Maximum counting speed:
  • The maximum counting speed at which the output section of the counter operates accurately without miscounting when input signal with duty ratio is 1:1. The counting speed is expressed in units of counts per second (CPS).
• Pulse wave that has repetitive and temporal changes of its level.
• Count Counting the number of pulses.
• Miss count, A state that number of pulses and counted is not matched.
• CPS: Count Per Second, Unit of counts per second that express counting speed.
• Duty ratio, It is the ratio of the ON time and OFF time of the counting input signal. The maximum counting speed of each counter is the counting speed when the duty ratio is 1:1.

Glossary and Functions

• Zero blanking, A function that removes unnecessary “zero” on display so that users do not have to
  be confused when reading display.
  • E.g.) When 123 is being displayed
    • Display with zero blanking function applied: 123
    • Display without zero blanking function: 0123
• Memory protection, A function that restores data counted until right before the main power is cut off and
  shows it on the display when having power source back.
• Reset, To restore the counting, display and output sections of the counter, to their initial states:
  • Manual reset : Press the Reset button on the front of the counter to return to the initial state.
  • Power reset: To reset the counter by cutting off the operating supply voltage.
  • External reset : To reset the counter by applying a specific signal to the reset input signal terminal.
  • Automatic reset : To reset the counter automatically with a signal generated from inside the counter.
  • Reset signal width : Min. reset signal width to reset by power off or by applying external (manual) reset
    signal.

Out of stock

SKU: AU-ATS8SD-4 Categories: Autonics, Timer