Schneider ATV630U15N4 Inverter 1.5kW 3P 380-480 V

Rp29.624.800 Rp15.404.900 48% off!

Schneider ATV630U15N4 Inverter 1.5kW 3P 380-480 V

Schneider ATV630U15N4 Inverter 1.5kW Main Specification

• Altivar Process ATV600
• Variable speed drive product type
• Process and utilities product application
• ATV630 device’s short name
• Standard version variant
• Product destination:
  • Asynchronous motors
  • Synchronous motors
• Integrated EMC filter with 150 m conforming to EN/IEC 61800-3 category C3
• IP degree of protection:
  • IP21 conforming to IEC 61800-5-1
  • IP21 conforming to IEC 60529
• 380 – 480 V rated supply voltage
• Forced convection cooling

Schneider ATV630U15N4 Inverter 1.5kW

• 50 – 60 Hz supply frequency at 5 – 5 %
• 380 – 480 V rated supply voltage at 15 – 10 %
• Motor power kW:
  • 1.5 kW (normal duty)
  • 0.75 kW (heavy duty)
• Motor power hp:
  • 2 hp normal duty
  • 1 hp heavy duty
• Line current:
  • 3 A at 380 V (normal duty)
  • 2.6 A at 480 V (normal duty)
  • 1.7 A at 380 V (heavy duty)
  • 1.5 A at 480 V (heavy duty)
• 50 kA prospective line Isc
• Apparent power:
  • 2.2 kVA at 480 V (normal duty)
  • 1.2 kVA at 480 V (heavy duty)
• Continuous output current:
  • 4 A at 4 kHz for normal duty
  • 2.2 A at 4 kHz for heavy duty
• Maximum transient current:
  • 4.4 A during 60 s (normal duty)
  • 3.3 A during 60 s (heavy duty)
• Asynchronous motor control profile:
  • Constant torque standard
  • Optimized torque mode
  • Variable torque standard
• Synchronous motor control profile:
  • Permanent magnet motor
  • Synchronous reluctance motor
• 0.1 – 500 Hz speed drive output frequency
• 4 kHz nominal switching frequency
• Switching frequency:
  • 2 – 12 kHz with derating factor
  • 4 – 12 kHz adjustable
• STO (safe torque off) SIL 3 safety
• 16 preset speeds discrete input logic
• Communication port protocol:
  • Modbus TCP
  • Ethernet
  • Modbus serial
• Option card:
  • Slot A, communication module:
    • Profibus DP V1
    • PROFINET
    • DeviceNet
    • CANopen SUB-D 9
    • Modbus TCP/EtherNet/IP
    • CANopen daisy chain RJ45
    • CANopen screw terminals
    • Ethernet IP/Modbus TCP/MD-Link
  • Slot A/slot B:
    • digital and analog I/O extension module
    • output relay extension module
  • Communication module, BACnet MS/TP
  • Communication module, Ethernet Powerlink

Complementary

• Wall mount mounting mode
• 3 phases network
• Relay outputs discrete :
  • R1A, R1B, R1C 250 V AC 3000 mA
  • R1A, R1B, R1C 30 V DC 3000 mA
  • R2A, R2C 250 V AC 5000 mA
  • R2A, R2C 30 V DC 5000 mA
  • R3A, R3C 250 V AC 5000 mA
  • R3A, R3C 30 V DC 5000 mA
• Output voltage <= power supply voltage
• Permissible temporary current boost:
  • 1.1 x In during 60 s (normal duty)
  • 1.5 x In during 60 s (heavy duty)
• Motor slip compensation:
  • Can be suppressed
  • Not available in permanent magnet motor law
  • Automatic whatever the load
  • Adjustable
• Linear adjustable separately acceleration and deceleration ramps from 0.01 – 9999 s
• Physical interface:
  • Ethernet
  • 2-wire RS 485
• Transmission rate:
  • 10, 100 Mbits
  • 4800 bps, 9600 bps, 19200 bps, 38.4 Kbps
• Frequency resolution:
  • Display unit: 0.1 Hz
  • Analog input: 0.012/50 Hz
• RTU transmission frame
• Electrical connection:
  • Control: removable screw terminals 0.5…1.5 mm²/AWG 20…AWG 16
  • Line side: screw terminal 2 x 50…3 x 120 mm²/2 x AWG 1/0…2 x 300 kcmil
  • Motor: screw terminal 2 x 50…3 x 120 mm²/2 x AWG 1/0…2 x 300 kcmil
• Connector type:
  • RJ45 (on the remote graphic terminal) for Ethernet/Modbus TCP
  • RJ45 (on the remote graphic terminal) for Modbus serial
• 500 kHz maximum output frequency
• 3 A maximum input current
• Motor power range AC-3:
  • 0.55- 1 kW at 380 – 440 V 3 phases
  • 0.55- 1 kW at 480 – 500 V 3 phases
• Wall mounted enclosure mounting

Environment

• Insulation resistance > 1 MOhm 500 V DC for 1 minute to earth
• 54.5 dB noise level conforming to 86/188/EEC
• Power dissipation in W:
  • Natural convection: 28 W at 380 V, switching frequency 4 kHz
  • Forced convection: 41 W at 380 V, switching frequency 4 kHz
• 38 m3/h volume of cooling air
• Vertical +/- 10 degree operating position
• Maximum THDI < 48 % full load conforming to IEC 61000-3-12
• Electromagnetic compatibility:
  • Electrostatic discharge immunity test level 3 conforming to IEC 61000-4-2
  • Radiated radio-frequency electromagnetic field immunity test level 3 conforming to IEC 61000-4-3
  • Electrical fast transient/burst immunity test level 4 conforming to IEC 61000-4-4
  • 1.2/50 µs – 8/20 µs surge immunity test level 3 conforming to IEC 61000-4-5
  • Conducted radio-frequency immunity test level 3 conforming to IEC 61000-4-6
• Vibration resistance:
  • 1.5 mm peak to peak (f= 2…13 Hz) conforming to IEC 60068-2-6
  • 1 gn (f= 13…200 Hz) conforming to IEC 60068-2-6
• Shock resistance 15 gn for 11 ms conforming to IEC 60068-2-27
• 5 – 95 % relative humidity without condensation conforming to IEC 60068-2-3
• Ambient air temperature for operation:
  • -15…50 °C (without derating)
  • 50…60 °C (with derating factor)
• -40…70 °C ambient air temperature for storage
• Operating altitude:
  • <= 1000 m without derating
  • 1000…4800 m with current derating 1 % per 100 m
• Standards:
  • UL 508C
  • EN/IEC 61800-3
  • Environment 1 category C2 EN/IEC 61800-3
  • IEC 61508
  • IEC 13849-1
  • Environment 2 category C3 EN/IEC 61800-3
  • EN/IEC 61800-5-1
  • IEC 61000-3-12
  • IEC 60721-3

Out of stock

SKU: ATV630U15N4 Categories: Inverter, Inverter ATV630