Schneider ATV12HU22M2 Inverter 2,2kW 240 VAC

Rp3.975.341

Main Specification

• Altivar 12 range of product
• Variable speed drive product type
• Simple machine product specific application
• Cabinet mount mounting mode
• Modbus communication port protocol
• 50/60 Hz +/- 5 % supply frequency
• 200 – 240 V – 15 – 10 % rated supply voltage
• 10 Ampere nominal output current
• Motor power 3 hp
• Motor power 2.2 kW
• Integrated EMC filter
• IP20 degree of protection
• 4 discrete input number
• 1 analogue input number
• 2 discrete output number
• 1 analogue output number
• 1 relay output number
• 2-wire RS 485 physical interface
• 1 RJ45 connector type
• 10 Ampere at 4 kHz continuous output current
• Server Modbus serial method access
• 0.5 – 400 Hz speed drive output frequency
• 1 – 20 speed range

Complementary

• Sampling duration:
  • 20 ms, tolerance +/- 1 ms for logic input
  • 10 ms for analogue input
• +/- 0.3 % linearity error of maximum value for analogue input
• Frequency resolution:
  • Analog input: converter A/D, 10 bits
  • Display unit: 0.1 Hz
• 20 ms +/- 1 ms time constant for reference change
• Transmission rate:
  • 9.6 kbit/s
  • 19.2 kbit/s
  • 38.4 kbit/s
• RTU transmission frame
• 1 – 247 number of addresses
• 8 bits data format, configurable odd, even or no parity
  • Communication service:
  • Read holding registers (03) 29 words
  • Write single register (06) 29 words
  • Write multiple registers (16) 27 words
  • Read/write multiple registers (23) 4/4 words
  • Read device identification (43)
• No impedance polarization
• Asynchronous motor control profile:
  • Voltage/frequency ratio (V/f)
  • Sensorless flux vector control
  • Quadratic voltage/frequency ratio
• 4 kHz maximum output frequency
• 150 – 170 % transient overtorque of nominal motor torque depending on drive rating and type of motor
• Acceleration and deceleration ramps:
  • U
  • Linear from 0 to 999.9 s
  • S
• Motor slip compensation:
  • Preset in factory
  • Adjustable
• Switching frequency:
  • 2 – 16 kHz adjustable
  • 4 – 16 kHz with derating factor
• 4 kHz nominal switching frequency
• Braking to standstill By DC injection
• False brake chopper integrated
• Line current:
  • 24.0 Ampere at 100 V (heavy duty)
  • 20.2 Ampere at 120 V (heavy duty)
• 20.2 Ampere maximum input current
• 240 Volt maximum output voltage
• 4.8 kVA at 240 V (heavy duty) apparent power
• Maximum transient current:
  • 15.0 Ampere during 60 s (heavy duty)
  • 16.5 Ampere during 2 s (heavy duty)
• 50 – 60 Hz network frequency
• 5 % relative symmetric network frequency tolerance
• 1 kA prospective line Isc
• 10.0 Ampere base load current at high overload
• Natural power dissipation 93.0 W

Environment

• Protection type:
  • Line supply overvoltage
  • Line supply under voltage
  • Overcurrent between output phases and earth
  • Overheating protection
  • Short-circuit between motor phases
  • Against input phase loss in three-phase
  • Thermal motor protection via the drive by continuous calculation of I²t
• 1.2 N.m tightening torque
• Electrical insulation between power and control
• Operating altitude:
  • > 1000…2000 m with current derating 1 % per 100 m
  • <= 1000 m without derating
• Vertical +/- 10 degree operating position
• Product certifications:
  • NOM
  • CSA
  • C-Tick
  • UL
  • GOST
  • RCM
  • KC
• CE marking
• Standards:
  • UL 508C
  • UL 618000-5-1
  • EN/IEC 61800-5-1
  • EN/IEC 61800-3
• On base plate assembly style
• Electromagnetic compatibility:
  • Electrical fast transient/burst immunity test level 4 conforming to EN/IEC 61000-4-4
  • Electrostatic discharge immunity test level 3 conforming to EN/IEC 61000-4-2
  • Immunity to conducted disturbances level 3 conforming to EN/IEC 61000-4-6
  • Radiated radio-frequency electromagnetic field immunity test level 3 conforming to EN/IEC 61000-4-3
  • Surge immunity test level 3 conforming to EN/IEC 61000-4-5
  • Voltage dips and interruptions immunity test conforming to EN/IEC 61000-4-11
• Environmental class (during operation):
  • Class 3C3 according to IEC 60721-3-3
  • Class 3S2 according to IEC 60721-3-3
• 150 m/s² at 11 ms maximum acceleration under shock impact (during operation)
• 10 m/s² maximum acceleration under vibrational stress (during operation) at 13 – 200 Hz
• 1.5 mm maximum deflection under vibratory load (during operation) at 2 – 13 Hz
• Class III overvoltage
• Adjustable PID regulator loop
• Vibration resistance:
  • 1 gn (f = 13…200 Hz) conforming to EN/IEC 60068-2-6
  • 1.5 mm peak to peak (f = 3…13 Hz) – drive unmounted on symmetrical DIN rail – conforming to EN/IEC 60068-2-6
• 15 gn shock resistance conforming to EN/IEC 60068-2-27 for 11 ms
• Relative humidity:
  • 5 – 95 % without condensation conforming to IEC 60068-2-3
  • 5 – 95 % without dripping water conforming to IEC 60068-2-3
• 0 dB noise level

Out of stock

Schneider ATV12HU22M2 Inverter 2,2kW 240 VAC

Schneider ATV12HU22M2 Inverter

SKU: ATV12HU22M2 Categories: Inverter, Inverter ATV12