Schneider Contactor LC1D09BD 9A 3NO 24VDC

Rp1.279.614

Main Specification

• DC standard control circuit type
• 24 V DC control circuit voltage
• 1 NO + 1 NC auxiliary contact composition
• 6 kV rated impulse withstand voltage conforming to IEC 60947
• Overvoltage category III
• Conventional free air thermal current:
  • 25 A (at 60 °C) for power circuit
  • 10 A (at 60 °C) for signalling circuit
• Irms rated making capacity:
  • 250 A at 440 V for power circuit conforming to IEC 60947
  • 140 A AC for signalling circuit conforming to IEC 60947-5-1
  • 250 A DC for signalling circuit conforming to IEC 60947-5-1
• 250 A at 440 V rated breaking capacity for power circuit conforming to IEC 60947
• Rated short-time withstand current:
  • 105 A 40 °C – 10 s for power circuit
  • 210 A 40 °C – 1 s for power circuit
  • 30 A 40 °C – 10 min for power circuit
  • 61 A 40 °C – 1 min for power circuit
  • 100 A – 1 s for signalling circuit
  • 120 A – 500 ms for signalling circuit
  • 140 A – 100 ms for signalling circuit
• Associated fuse rating:
  • 10 A gG for signalling circuit conforming to IEC 60947-5-1
  • 25 A gG at <= 690 V coordination type 1 for power circuit
  • 20 A gG at <= 690 V coordination type 2 for power circuit
• 2.5 mOhm – Ith 25 A 50 Hz for power circuit average impedance
• Rated insulation voltage:
  • Power circuit:
    • 690 V conforming to IEC 60947-4-1
    • 600 V CSA certified
    • 600 V UL certified
  • Signalling circuit:
    • 690 V conforming to IEC 60947-1
    • 600 V CSA certified
    • 600 V UL certified
• Electrical durability:
  • 0.6 Mcycles 25 A AC-1 at Ue <= 440 V
  • 2 Mcycles 9 A AC-3 at Ue <= 440 V
  • 2 Mcycles 9 A AC-3e at Ue <= 440 V

Complementary

• Power dissipation per pole:
  • 1.56 W AC-1
  • 0.2 W AC-3
  • 0.2 W AC-3e
• With Front cover
• Plate & Rail mounting support
• Standards:
  • CSA C22.2 No 14
  • EN 60947-4-1
  • EN 60947-5-1
  • IEC 60947-4-1
  • IEC 60947-5-1
  • UL 508
  • IEC 60335-1
• Product certifications:
  • LROS (Lloyds register of shipping)
  • CSA
  • UL
  • GOST
  • DNV
  • CCC
  • GL
  • BV
  • RINA
  • UKCA
• Connections – terminals:
  • Power circuit, screw clamp terminals:
    • 1 cable(s) 1…4 mm²flexible without cable end
    • 2 cable(s) 1…4 mm²flexible without cable end
    • 1 cable(s) 1…4 mm²flexible with cable end
    • 2 cable(s) 1…2.5 mm²flexible with cable end
    • 1 cable(s) 1…4 mm²solid without cable end
    • 2 cable(s) 1…4 mm²solid without cable end
  • Control circuit, screw clamp terminals:
    • 1 cable(s) 1…4 mm²flexible without cable end
    • 2 cable(s) 1…4 mm²flexible without cable end
    • 1 cable(s) 1…4 mm²flexible with cable end
    • 2 cable(s) 1…2.5 mm²flexible with cable end
    • 1 cable(s) 1…4 mm²solid without cable end
    • 2 cable(s) 1…4 mm²solid without cable end
• Tightening torque:
  • Power circuit:
    • 1.7 N.m – on screw clamp terminals – with screwdriver flat Ø 6 mm
    • 1.7 N.m – on screw clamp terminals – with screwdriver Philips No 2
    • 2.5 N.m – on screw clamp terminals – with screwdriver pozidriv No 2
  • Control circuit:
    • 1.7 N.m – on screw clamp terminals – with screwdriver flat Ø 6 mm
    •  Screwdriver Philips No 2 with 1.7 – N.m – on screw clamp terminals
    • 1.7 N.m – on screw clamp terminals – with screwdriver pozidriv No 2
• Operating time:
  • 53.55…72.45 ms closing
  • 16…24 ms opening

Environment

• Safety reliability level:
  • B10d = 1369863 cycles contactor with nominal load conforming to EN/ISO 13849-1
  • B10d = 20000000 cycles contactor with mechanical load conforming to EN/ISO 13849-1
• 30 Mcycles mechanical durability
• 3600 cyc/h 60 °C maximum operating rate
• Built-in bidirectional peak limiting diode suppressor coil technology
• Control circuit voltage limits:
  • 0.1…0.25 Uc (-40…70 °C):drop-out DC
  • 0.7…1.25 Uc (-40…60 °C):operational DC
  • 1…1.25 Uc (60…70 °C):operational DC
• 28 ms time constant
• 5.4 W (at 20 °C) inrush power in W
• 5.4 W at 20 °C hold-in power consumption in W
• Auxiliary contacts type:
  • Type mechanically linked 1 NO + 1 NC conforming to IEC 60947-5-1
  • Type mirror contact 1 NC conforming to IEC 60947-4-1
• 25…400 Hz signalling circuit frequency
• 5 mA for signalling circuit minimum switching current
• 17 V for signalling circuit minimum switching voltage
• Non-overlap time:
  • 1.5 ms on de-energisation between NC and NO contact
  • 1.5 ms on energisation between NC and NO contact
• > 10 MOhm for signalling circuit insulation resistance
• IP20 front face conforming to IEC 60529
• Climatic withstand:
  • Conforming to IACS E10
  • Conforming to IEC 60947-1 Annex Q category D
• TH protective treatment conforming to IEC 60068-2-30
• Ambient air temperature for operation:
  • -40…60 °C
  • 60…70 °C with derating
• -60…80 °C ambient air temperature for storage
• 0…3000 m operating altitude
• 850 °C 850 °C conforming to IEC 60695-2-1 conforming to IEC 60695-2-1
• Mechanical robustness:
  • Vibrations contactor open: 2 Gn, 5…300 Hz
  • Vibrations contactor closed: 4 Gn, 5…300 Hz
  • Shocks contactor open: 10 Gn for 11 ms
  • Shocks contactor closed: 15 Gn for 11 ms

Stock Available

Schneider Contactor LC1D09BD 9A 3NO 24VDC

• TeSys Deca product name
• Contactor product type
• LC1D device short name
• Contactor application:
  • Motor control
  • Resistive load
• 3 NO power pole contact composition
• Rated operational voltage:
  • Power circuit: <= 690 V AC 25…400 Hz
  • Power circuit: <= 300 V DC
• Rated operational current:
  • 9 A (at <60 °C) at <= 440 V AC AC-3 for power circuit
  • 25 A (at <60 °C) at <= 440 V AC AC-1 for power circuit
  • 9 A (at <60 °C) at <= 440 V AC AC-3e for power circuit
• Motor power kW:
  • 2.2 kW at 220…230 V AC 50/60 Hz (AC-3)
  • 4 kW at 380…400 V AC 50/60 Hz (AC-3)
  • 4 kW at 415…440 V AC 50/60 Hz (AC-3)
  • 5.5 kW at 500 V AC 50/60 Hz (AC-3)
  • 5.5 kW at 660…690 V AC 50/60 Hz (AC-3)
  • 2.2 kW at 400 V AC 50/60 Hz (AC-4)
  • 2.2 kW at 220…230 V AC 50/60 Hz (AC-3e)
  • 4 kW at 380…400 V AC 50/60 Hz (AC-3e)
  • 4 kW at 415…440 V AC 50/60 Hz (AC-3e)
  • 5.5 kW at 500 V AC 50/60 Hz (AC-3e)
  • 5.5 kW at 660…690 V AC 50/60 Hz (AC-3e)
• Motor power HP (UL / CSA):
  • 1 hp at 230/240 V AC 50/60 Hz for 1 phase motors
  • 2 hp at 200/208 V AC 50/60 Hz for 3 phases motors
  • 2 hp at 230/240 V AC 50/60 Hz for 3 phases motors
  • 5 hp at 460/480 V AC 50/60 Hz for 3 phases motors
  • 7.5 hp at 575/600 V AC 50/60 Hz for 3 phases motors
  • 0.33 hp at 115 V AC 50/60 Hz for 1 phase motors

Schneider Contactor LC1D09BD

SKU: LC1D09BD Categories: Contactor, Kontaktor LC1D