Schneider ATV930D15N4 Inverter 15kW 3P 400-480 V - ATV930D15N4
Rp48.013.100 Rp24.966.800 48% off! Sale!
Schneider ATV930D15N4 Inverter 15kW 3P 400-480 V
Schneider ATV930D15N4 Inverter 15kW Main Spesification
- Altivar Process ATV900
- Industrial device application
- Variable speed drive product type
- Product destination:
- Synchronous motors
- Asynchronous motors
- Process for industrial product specific application
- Variant:
- Standard version
- Without braking chopper
- 3 phases network
- Wall mount mounting mode
- Communication port protocol:
- EtherNet/IP
- Modbus serial
- Modbus TCP
- 380 – 480 V rated supply voltage 15 – 10 %
- Motor power kW:
- 15.0 kW for normal duty
- 11.0 kW for heavy duty
- Motor power hp:
- 20.0 hp for normal duty
- 15.0 hp for heavy duty
- Continuous output current:
- 31.7 A at 4 kHz for normal duty
- 23.5 A at 4 kHz for heavy duty
- EMC filter:
- Integrated
- With EMC plate option
- IP21 conforming to IP degree of protection
- UL type 1 degree of protection
- 16 preset speeds discrete input logic
- Asynchronous motor control profile:
- Constant torque standard
- Optimized torque mode
- Variable torque standard
- Synchronous motor control profile:
- Permanent magnet motor
- Synchronous reluctance motor
- 599 Hz maximum output frequency
- Switching frequency:
- 2 – 16 kHz adjustable
- 4 – 16 kHz with derating factor
- 4 kHz nominal switching frequency
- Line current:
- 27.0 A at 380 V (normal duty)
- 20.6 A at 380 V (heavy duty)
- 23.3 A at 480 V (normal duty)
- 18.1 A at 480 V (heavy duty)
- Apparent power:
- 19.4 kVA at 480 V (normal duty)
- 15 kVA at 480 V (heavy duty)
- Maximum transient current:
- 38 A during 60 s (normal duty)
- 35.3 A during 60 s (heavy duty)
- 50 – 60 Hz network frequency
- 50 kA prospective line Isc
Complementary
- 10 discrete input number
- Discrete input type:
- DI1 – DI8 programmable, 24 V DC (<= 30 V), impedance: 3.5 kOhm
- DI7, DI8 programmable as pulse input: 0 – 30 kHz, 24 V DC (<= 30 V)
- STOA, STOB safe torque off, 24 V DC (<= 30 V), impedance: > 2.2 kOhm
- 2 discrete output number
- Discrete output type:
- Logic output DQ+ 0…1 kHz <= 30 V DC 100 mA
- Programmable as pulse output DQ+ 0…30 kHz <= 30 V DC 20 mA
- Logic output DQ- 0…1 kHz <= 30 V DC 100 mA
- 3 analogue input number
- Analogue input type:
- AI1, AI2, AI3 software-configurable voltage: 0…10 V DC, impedance: 30 kOhm, resolution 12 bits
- AI1, AI2, AI3 software-configurable current: 0…20 mA/4…20 mA, impedance: 250 Ohm, resolution 12 bits
- 2 analogue output number
- Analogue output type:
- Software-configurable voltage AQ1, AQ2: 0…10 V DC impedance 470 Ohm, resolution 10 bits
- Software-configurable current AQ1, AQ2: 0…20 mA impedance 500 Ohm, resolution 10 bits
- 3 relay output number
- Configurable relay output logic:
- R1: fault relay NO/NC electrical durability 100000 cycles
- R2: sequence relay NO electrical durability 1000000 cycles
- R3: sequence relay NO electrical durability 1000000 cycles
- Maximum switching current:
- Relay output R1 on:
- Resistive load, cos phi = 1: 3 A at 250 V AC
- Resistive load, cos phi = 1: 3 A at 30 V DC
- Inductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 250 V AC
- Inductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 30 V DC
- Relay output R2, R3 on:
- Resistive load, cos phi = 1: 5 A at 250 V AC
- Resistive load, cos phi = 1: 5 A at 30 V DC
- nductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 250 V AC
- Inductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 30 V DC
- Minimum switching current relay output R1, R2, R3: 5 mA at 24 V DC
Schneider ATV930D15N4 Inverter 15kW
- Physical interface:
- Connector type:
- Slave Modbus TCP access method
- Transmission rate:
- 10, 100 Mbits
- 4.8 kbps
- 9600 bit/s
- 19200 bit/s
- RTU transmission frame
- 1 – 247 number of addresses
- 8 bits data format, configurable odd, even or no parity
- No impedance polarization
- Linear adjustable separately from 0.01 – 9999 s acceleration and deceleration ramps
- Motor slip compensation:
- Not available in permanent magnet motor law
- Automatic whatever the load
- Adjustable
- Can be suppressed
- Braking to standstill By DC injection
- 27.0Â A maximum input current
- 480.0 V maximum output voltage
- 5 % relative symmetric network frequency tolerance
- 23.5Â A base load current at high overload
- 31.7Â A base load current at low overload
- Power dissipation in W:
- Forced convection: 59Â W at 380 V, switching frequency 4 kHz
- Natural convection: 366Â W at 380 V, switching frequency 4 kHz
- Electrical connection:
- Control: screw terminal 0.5…1.5 mm²/AWG 20…AWG 16
- Line side: screw terminal 10…16 mm²/AWG 8…AWG 6
- Motor: screw terminal 10…16 mm²/AWG 8…AWG 6
- DC bus: screw terminal 10…16 mm²/AWG 8…AWG 6
- Transmission rate:
- 10/100 Mbit/s for Ethernet IP/Modbus TCP
- 4.8, 9.6, 19.2, 38.4 kbit/s for Modbus serial
- Half duplex, full duplex, autonegotiation Ethernet IP/Modbus TCP exchange mode
- 8 bits data format, configurable odd, even or no parity for Modbus serial
- No impedance for Modbus serial
- 1 – 247 for Modbus serial addresses
Schneider ATV930D15N4 Inverter 15kW
- Supply:
- External supply for digital inputs: 24 V DC (19…30 V), <1.25 mA, protection type: overload and short-circuit protection
- Internal supply for reference potentiometer (1 to 10 kOhm): 10.5 V DC +/- 5 %, <10 mA, protection type: overload and short-circuit protection
- Internal supply for digital inputs and STO: 24 V DC (21…27 V), <200 mA, protection type: overload and short-circuit protection
- Local signalling:
- Local diagnostic: 3 LED (mono/dual colour)
- Embedded communication status: 5 LED (dual colour)
- Communication module status: 2 LED (dual colour)
- Presence of voltage: 1 LED (red)
- Input compatibility:
- DI1…DI8: discrete input level 1 PLC conforming to EN/IEC 61131-2
- DI7, DI8: pulse input level 1 PLC conforming to IEC 65A-68
- STOA, STOB: discrete input level 1 PLC conforming to EN/IEC 61131-2
- Discrete input logic:
- Positive logic (source) (DI1…DI8), < 5 V (state 0), > 11 V (state 1)
- Negative logic (sink) (DI1…DI8), > 16 V (state 0), < 10 V (state 1)
- Positive logic (source) (DI7, DI8), < 0.6 V (state 0), > 2.5 V (state 1)
- Positive logic (source) (STOA, STOB), < 5 V (state 0), > 11 V (state 1)
- Sampling duration:
- 2 ms +/- 0.5 ms (DI1…DI8) – discrete input
- 5 ms +/- 1 ms (DI7, DI8) – pulse input
- 1 ms +/- 1 ms (AI1, AI2, AI3) – analog input
- 5 ms +/- 1 ms (AQ1, AQ2) – analog output
- Accuracy:
- +/- 0.6 % AI1, AI2, AI3 for a temperature variation 60 °C analog input
- +/- 1 % AQ1, AQ2 for a temperature variation 60 °C analog output
- Linearity error:
- AI1, AI2, AI3: +/- 0.15 % of maximum value for analog input
- AQ1, AQ2: +/- 0.2 % for analog output
- Relay output (R1, R2, R3): 5 ms (+/- 0.5 ms) refresh time
- Isolation between power and control terminals
Environment
- Operating altitude:
- <= 1000 m without derating
- 1000…4800 m with current derating 1 % per 100 m
- Vertical +/- 10 degree operating position
- Product certifications:
- CE marking
- Standards:
- UL 508C
- IEC 13849-1
- EN/IEC 61800-3
- IEC 61508
- EN/IEC 61800-5-1
- IEC 61000-3-12
- IEC 60721-3
- Maximum THDI < 48 % full load conforming to IEC 61000-3-12
- Enclosed assembly style
- Electromagnetic compatibility:
- Electrostatic discharge immunity test level 3 conforming to IEC 61000-4-2
- Radiated radio-frequency electromagnetic field immunity test level 3 conforming to IEC 61000-4-3
- Electrical fast transient/burst immunity test level 4 conforming to IEC 61000-4-4
- 1.2/50 µs – 8/20 µs surge immunity test level 3 conforming to IEC 61000-4-5
- Conducted radio-frequency immunity test level 3 conforming to IEC 61000-4-6
- Environmental class (during operation):
- Class 3C3 according to IEC 60721-3-3
- Class 3S3 according to IEC 60721-3-3
- 150 m/s² at 11 ms maximum acceleration under shock impact (during operation)
- 10 m/s² maximum acceleration under vibrational stress (during operation) at 13 – 200 Hz
- 1.5 mm maximum deflection under vibratory load (during operation) at 2 – 13 Hz
- 1260Â m3/h volume of cooling air
- Overvoltage category III
- Adjustable PID regulator, regulation loop
- Insulation resistance > 1 MOhm 500 V DC for 1 minute to earth
- 76Â dB noise level conforming to 86/188/EEC
- Vibration resistance:
- 1.5 mm peak to peak (f= 2 – 13 Hz) conforming to IEC 60068-2-6
- 1 gn (f= 13 – 200 Hz) conforming to IEC 60068-2-6
- 15 gn for 11 ms shock resistance conforming to IEC 60068-2-27
- Environmental characteristic:
- Chemical pollution resistance class 3C3 conforming to EN/IEC 60721-3-3
- Dust pollution resistance class 3S3 conforming to EN/IEC 60721-3-3
- 5 – 95 % relative humidity without condensation conforming to IEC 60068-2-3
Out of stock
Reviews
There are no reviews yet.